2N6756, 2N6758, 2N6760 and 2N6762 Qualified Levels: N-CHANNEL MOSFET JAN, JANTX, and Available on JANTXV commercial Qualified per MIL-PRF-19500/542 versions DESCRIPTION This family of 2N6756, 2N6758, 2N6760 and 2N6762 switching transistors are military qualified up to the JANTXV level for high-reliability applications. Microsemi also offers numerous other transistor products to meet higher and lower power ratings with various switching speed requirements in both through-hole and surface-mount packages. Important: For the latest information, visit our website 2N6756, 2N6758, 2N6760 and 2N6762 NOTES: 1. Derated linearly by 0.6 W/C for T > +25 C. C 2. The following formula derives the maximum theoretical ID limit. ID is limited by package and internal wires and may be limited by pin diameter: 3. I = 4 x I as calculated in note 2. DM D1 MECHANICAL and PACKAGING CASE: TO-3 metal can. TERMINALS: Solder dipped (Sn63/Pb37) over nickel plated alloy 52. RoHS compliant matte-tin plating is available on commercial grade only. MARKING: Manufacturer s ID, part number, date code. WEIGHT: Approximately 12.7 grams. See Package Dimensions on last page. PART NOMENCLATURE JAN 2N6756 (e3) Reliability Level RoHS Compliance JAN = JAN Level e3 = RoHS compliant (available JANTX = JANTX Level on commercial grade only) JANTXV = JANTXV Level Blank = non-RoHS compliant Blank = Commercial JEDEC type number (see Electrical Characteristics table) SYMBOLS & DEFINITIONS Symbol Definition Rate of change of diode current while in reverse-recovery mode, recorded as maximum value. di/dt I Drain current D I Forward current F R Gate drive impedance G T Case Temperature C V Drain supply voltage DD V Drain source voltage DS V Gate source voltage GS T4-LDS-0111, Rev. 3 (121465) 2012 Microsemi Corporation Page 2 of 9