IS31AP4996-GRLS2-TR

IS31AP4996 1.1W AUDIO POWER AMPLIFIER WITH ACTIVE-HIGH STANDBY MODE August 2013 GENERAL DESCRIPTION FEATURES The IS31AP4996 has been designed for demanding Operating from V = 2.7V ~ 5.5V CC audio applications such as mobile phones and permits 1.1W output power V = 5V, THD+N= 1%, CC the reduction of the number of external components. f = 1kHz, with 8 load It is capable of delivering 1.1W of continuous RMS Ultra-low consumption in standby mode (much output power into an 8 load 5V. less than 2 A) 56dB PSRR 217Hz in grounded mode An externally-controlled standby mode reduces the Near-zero click-and-pop supply current to much less than 2 A. It also includes Ultra-low distortion (0.074% 0.5W, 1kHz) internal thermal shutdown protection. SOP-8 and MSOP-8 package The unity-gain stable amplifier can be configured by external gain setting resistors. APPLICATIONS Mobile phones PDAs Portable electronic devices Notebook computer TYPICAL APPLICATION CIRCUIT Figure 1 Typical Application Circuit Lumissil Microsystems www.lumissil.com 1 Rev. B, 07/23/2013 IS31AP4996 PIN CONFIGURATION Package Pin Configuration (Top View) SD 1 8 OUT+ BYPASS 2 7 GND SOP-8 MSOP-8 IN+ 3 6 VCC IN- 45 OUT- PIN DESCRIPTION No. Pin Description The device enters shutdown mode when a high level is applied 1 SD on this pin. Bypass capacitor pin which provides the common mode voltage 2 BYPASS (V /2). CC 3 IN+ Positive input of the first amplifier. Negative input of the first amplifier, receives the audio input 4 IN- signal. Connected to the feedback resistor R and to the input F resistor R . IN Negative output of the IS31AP4996. Connected to the load and 5 OUT- to the feedback resistor R . F 6 VCC Positive analog supply of the chip. 7 GND Ground. 8 OUT+ Positive output of the IS31AP4996. Connected to the load. Lumissil Microsystems www.lumissil.com 2 Rev. B, 07/23/2013