2N6286 and 2N6287 Qualified Levels: JAN, JANTX, and PNP Darlington Power Silicon Transistor Available on JANTXV commercial Qualified per MIL-PRF-19500/505 versions DESCRIPTION This high speed PNP transistor is rated at 20 amps and is military qualified up to a JANTXV level. This TO-204AA isolated package features a 180 degree lead orientation. Important: For the latest information, visit our website 2N6286 and 2N6287 MECHANICAL and PACKAGING CASE: Industry standard TO-204AA (TO-3), hermetically sealed, 0.040 inch diameter pins FINISH: Solder dipped tin-lead over nickel plated alloy 52 or RoHS compliant matte-tin plating. Solderable per MIL-STD-750 method 2026. POLARITY: PNP (see schematic) MOUNTING HARDWARE: Consult factory for optional insulator and sheet metal screws WEIGHT: Approximately 15 grams See package dimensions on last page. PART NOMENCLATURE JAN 2N6286 (e3) Reliability Level RoHS Compliance JAN = JAN Level e3 = RoHS Compliant (available on commercial grade only) JANTX = JANTX Level JANTXV = JANTXV Level Blank = non-RoHS Compliant Blank = Commercial JEDEC type number (see Electrical Characteristics table) SYMBOLS & DEFINITIONS Symbol Definition I Base current: The value of the dc current into the base terminal. B I Collector current: The value of the dc current into the collector terminal. C I Emitter current: The value of the dc current into the emitter terminal. E T Case temperature: The temperature measured at a specified location on the case of a device. C V Collector-base voltage: The dc voltage between the collector and the base. CB Collector-base voltage, base open: The voltage between the collector and base terminals when the emitter terminal is V CBO open-circuited. V Collector-supply voltage: The supply voltage applied to a circuit connected to the collector. CC Collector-emitter voltage, base open: The voltage between the collector and the emitter terminals when the V CEO base terminal is open-circuited. V Emitter-base voltage: The dc voltage between the emitter and the base. EB Emitter-base voltage, collector open: The voltage between the emitter and base terminals with the V EBO collector terminal open-circuited. T4-LDS-0309, Rev. 1 (8/7/13) 2013 Microsemi Corporation Page 2 of 7