MPQ8039GN-AEC1-Z

MPQ8039 High Current Power Half Bridge AEC-Q100 Qualified The Future of Analog IC Technology DESCRIPTION FEATURES The MPQ8039 is a general purpose, high Guaranteed Industrial/Automotive Temp. frequency half bridge power driver capable of Range Limits driving a 9A load. The device integrates both 9A Peak Current Output top and bottom N-Channel MOSFET power 4.25A Continuous Current Output switches and is fully protected from both Up to 1.2MHz Switching Frequency sourcing and sinking current by a preset Protected Integrated Power 100m Switches cycle-by-cycle current limit. It has a wide input All Switches Current Limited voltage range from 7.5V to 25V. Integrated Under-Voltage Protection The MPQ8039 features a low-current shutdown Integrated Thermal Protection mode, input under-voltage protection, thermal 2.5 A Standby Mode shutdown. It interfaces with standard logic True 2-Quadrant Operation signals and is available in a small SOIC8E Sources and Sinks Current package. Available in AEC-Q100 Qualified Grade APPLICATIONS Class D Audio Driver o 25W/4/10% Output Power Single Ended o 70W/4 /10% Output Power Full Bridge Full or Half Bridge DC-DC Switching Regulator Motor Driver All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page. MPS and The Future of Analog IC Technology are Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION V SP 2 + SP 7 DRV 6 5 BS ENABLE SHDN 47nF 1 3 PWM INPUT SW V PWM OUT SIGNAL GND 4 MPQ8039 Rev.1.02 www.MonolithicPower.com 1 8/25/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2016 MPS. All Rights Reserved. TM MPQ8039 HIGH CURRENT POWER HALF BRIGDE, AEC-Q100 QUALIFIED ORDERING INFORMATION Part Number Package Top Marking MPQ8039GN* SOIC8E MP8039 MPQ8039GN-AEC1** SOIC8E MP8039 * For Tape & Reel, add suffix Z (eg. MPQ8039GNZ) ** For Tape & Reel, add suffix Z (eg. MPQ8039GN-AEC1Z) PACKAGE REFERENCE 1 8 2 7 3 6 4 5 MPQ8039 PD01-SOIC8N (4) (1) Thermal Resistance JA JC ABSOLUTE MAXIMUM RATINGS (5 SOIC8E ................................... 48 ...... 10 ... C/W SP Supply Voltage (V ) ........... -0.3V to +28V ) SP SW Pin Voltage ............................... 0.3V to V SP Notes: SW to BS ....................................... 0.3V to +6V 1) Absolute maximum ratings are rated under room temperature unless otherwise noted. Exceeding these ratings may Voltage at All Other Pins ................ 0.3V to +6V damage the device. (2) Continuous Power Dissipation (T = +25C) A 2) The maximum allowable power dissipation is a function of the maximum junction temperature TJ (MAX), the junction-to- ............................................................. 2.5W ambient thermal resistance JA, and the ambient temperature Storage Temperature ............... 55 C to +150 C TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD (MAX) = (TJ (3) (MAX)-TA)/JA. Exceeding the maximum allowable power Recommended Operating Conditions dissipation will cause excessive die temperature, and the SP Supply Voltage (V ) .................. 7.5V to 24V SP device will go into thermal shutdown. Internal thermal Peak Output Current ...................... 9A Maximum shutdown circuitry protects the device from permanent damage. Operating Junction Temp. (T ). -40C to +125C J 3) The device is not guaranteed to function outside of its operating conditions. 4) Measured on approximately 1 square of 1 oz copper. 5) For room temperature only. MPQ8039 Rev.1.02 www.MonolithicPower.com 2 8/25/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2016 MPS. All Rights Reserved.