VN330SPTR-E STMicroelectronics

VN330SP-E Quad high-side smart power solid-state relay Datasheet - production data Open drain diagnostic output Fast demagnetization of inductive loads Conforms to IEC 61131-2 Description The VN330SP-E is a monolithic device developed using the VIPower technology, intended to drive four independent resistive or Features inductive loads with one side connected to (1) (2) (1) ground. Active current limitation prevents Type V R I V demag DS(on) OUT CC dropping of the system power supply in case of VN330SP-E VCC-55 V 0.32 0.7 A 36 V shorted load. Built-in thermal shutdown protects the chip from overtemperature and short-circuit. Notes: The open drain diagnostic output indicates (1) Per channel overtemperature conditions. (2) At T = 85 C J Table 1: Device summary Order code Package Packing Output current: 0.7 A per channel VN330SP-E Tube PowerSO-10 Digital input clamped at 32 V minimum VN330SPTR-E Tape and reel voltage Shorted load and overtemperature protections Built-in current limiter Undervoltage shutdown February 2017 DocID11504 Rev 4 1/20 www.st.com This is information on a product in full production. Contents VN330SP-E Contents 1 Block diagram .................................................................................. 5 2 Pin connection ................................................................................. 6 3 Maximum ratings ............................................................................. 7 4 Electrical characteristics ................................................................ 8 5 Test circuits ................................................................................... 11 6 Switching time waveforms and truth table .................................. 12 7 Package information ..................................................................... 14 7.1 PowerSO-10 package information .................................................. 14 7.2 PowerSO-10 packing information .................................................... 16 8 Revision history ............................................................................ 19 2/20 DocID11504 Rev 4