STPS1L60 Datasheet 60 V, 1 A low drop power Schottky rectifier Features Negligible switching losses Low forward voltage drop Surface mount miniature packages Avalanche rated ECOPACK2 compliant Applications Lighting Desktop power supply Battery charger Set top box Auxiliary power Description Axial and surface mount power Schottky rectifiers suited to switched mode power supplies and high frequency DC to DC converters. Packaged in SMA, SMA Flat Notch, STmite flat, DO-41 and SOD123Flat, the STPS1L60 is ideal for use in low voltage, high frequency inverters and small battery chargers. Product status STPS1L60 Product summary Symbol Value I F(AV) 1 A V 60 V RRM T 175 C j(max.) V 0.50 V F(typ.) DS2133 - Rev 12 - September 2019 www.st.com For further information contact your local STMicroelectronics sales office.STPS1L60 Characteristics 1 Characteristics Table 1. Absolute ratings (limiting values at 25 C, unless otherwise specified) Symbol Parameter Value Unit V Repetitive peak reverse voltage 60 V RRM SMA/DO-41 10 I Forward rms current A F(RMS) STmite flat 2 SMA T = 155 C L T = 160 C SMA Flat Notch L I T = 145 C Average forward current = 0.5, square wave DO-41 1 A F(AV) L T = 160 C SOD123 Flat L T = 160 C STmite flat C SMA, DO-41, STmite flat 40 I Surge non repetitive forward current SMA Flat Notch t = 10 ms sinusoidal 60 A FSM p SOD123 Flat 50 P t = 10 s, T = 125 C Repetitive peak avalanche power 85 W ARM p j T Storage temperature range -65 to +175 C stg (1) T Operating junction temperature +175 C j 1. (dP /dT ) < (1/R ) condition to avoid thermal runaway for a diode on its own heatsink. tot j th(j-a) Table 2. Thermal resistance parameters Symbol Parameter Max. value Unit SMA 30 SMA Flat Notch 20 R th(j-l) Junction to lead DO-41/lead length = 10 mm 45 C/W SOD123 Flat 20 R Junction to case STmite flat 20 th(j-c) For more information, please refer to the following application note : AN5088 : Rectifiers thermal management, handling and mounting recommendations Table 3. Static electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit T = 25 C j - 50 A (1) I T = 100 C V = V Reverse leakage current - 1.5 5 R j R RRM mA T = 125 C - 5.6 21 j DS2133 - Rev 12 page 2/19